Friday, 30 November 2018

Frosty The Snowman...

Hello all...

As we head into December, I'm just popping by today to share this fun vignette project that I've made using some more of the wonderful Christmas idea-ology products from Tim Holtz. As regular readers and friends of my blog, you'll already know that I adore Christmas and love creating and displaying home decor pieces around my home and as soon as I saw these adorable little Salvaged Snowmen, I knew that I just had to build a snowman and create a scene for him to call home and hope you'll enjoy how this project came together.
So, grab yourself a hot chocolate and let's get started...
To begin with I needed to make my box and this shadow box is actually made from the second largest vignette box which I sandwiched between two of the Collage Frames which will act as a support for the box and create this freestanding vignette. I started by covering the inside of the vignette box with panels of paper from the Christmas Paper Stash which I then adhered into place using Matte Collage Medium. On the outside of the box, I covered it with the typewriter script paper which I also used to  cover my collage frames. Remember when cutting the papers, you want the font so that it will read correctly, so cut a horizontal piece for the top and bottom sections of the box and vertical pieces for the sides of the box. Adhere the panels onto the outside of the vignette box.
To complete the my little box and create a nice, seamless finish on the inside, I added some polka dot design tape around the edges, overlapping it onto the inside of the box before giving everything a coat of Matte Collage Medium to seal the papers and setting it aside to dry.
Moving onto the collage frames ~ you will need two matching frames for this project and so that they looked good back and front, I painted what will become the back of the box with Black Soot Distress Paint. Once it was dry, I then dry brushed some Brushed Pewter Paint over the top. Heat dry the frames and once again, apply some Collage Medium over the top to seal it.

For the fronts of the frames, both of which will be facing forwards ~ I covered these with the same black and white typewriter script paper that I'd used on the outside of the vignette box, adhering the paper with Collage Medium and then flipping the frame over and cutting away the aperture section of the frame. Keep one of the aperture cut outs for later!!! I always use a Sanding Tool to smooth of any rough edges of paper that might be showing and just sand very lightly around the edge.

To assemble the box I placed the first of the collage frames onto my glass mat, paper side uppermost and then attached the covered vignette box into place, placing it over the top of the aperture. I then took my second frame, and attached this over the top of the box to create my freestanding piece.
Leave this to one side so that all the adhesive dries thoroughly and nothing moves before even thinking of touching it again!!
This is also where you need that piece of paper that you cut out from the aperture earlier, as this is going to fit onto the back of the box to give it a nice finish and I just used the reverse side of the paper, the lovely plaid pattern and slotted it into the hole, adhering it into place with Collage Medium!
Whilst the box is doing it's thing, I moved onto the little scene and started my painting my Salvaged Snowman using a selection of Distress Paints ~ Tumbled Glass for his scarf, Candied Apple for his gloves and earmuffs, Black Soot for hat, eyes and buttons and Walnut Stain on his broom. I carefully applied each paint to the individual areas and allowed it to dry. Once it was dry, I then scratched away at some of the paint to remove it, creating much more of a vintage feel to the piece. I sealed the snowman with some Collage Medium and then sprinkled some Rock Candy Distress Glitter over the top, just allowing the glitter to touch random areas, so that he looks like he's been kissed by frost.
To create my snowy tree, I applied gesso to the tips only ~ you can use either your fingertips or a brush to do this but you want the lightest of touches and only a hint of paint showing. The gesso is going to act as a resist when you add colour and you will need to allow the gesso to dry completely before the next step. Once it is dry, I then spritzed my tree with Peeled Paint Distress Spray Stain, wiping away any excess stain from the tree and revealing the little snowy white tips where the gesso was applied.
The final embellishments for the scene are the icicles and the snowballs, which I covered with Collage Medium before sprinkling with some more Rock Candy Dry Glitter.

We now have all the pieces ready to be arranged and I began by adding some little silver stars to the back wall of the box and an Ephemera Snippet piece, 'Compliments of the Season' which I matted onto silver metallic card and then mounted onto the box.
I attached the icicle along the bottom edge of the aperture of the box and then arranged the snowman, tree and baubles onto a bed of cheesecloth. As a snowy base, I applied some Grit Paste around each of the pieces, sprinkling glitter over the top.
We're nearly there and all that is left is the festive foliage that sits in the top left hand corner of box. I used a selection of dies from the Mini Holiday Greens set and cut the foliage from Classic Kraft Card before frosting each piece with Rock Candy Dry Distress Glitter. The poinsettia is made using my favourite poinsettia die, Tattered Poinsettia to die cut lightweight card that I painted with Festive Berries Distress Paint. I then just shaped and layered each of the die cuts to create a dimensional piece and added gold glitter glass to the centre. I then took my splatter brush, loaded with Picket Fence Paint and splattered all the die cut elements with the paint before attaching the arrangement onto the box.
Finally, I added the 'baby, it's cold outside' quote chip...
... and completed the piece with some Jingle Brads in each corner and a Vignette Accent on the top right hand corner of the frame aperture.
Thanks so much for stopping by today and once again, thanks a million to Tim, Mario and Paula for such wonderful new idea-ology products that spark my imagination ~ I appreciate you all so very much!

See you all again soon...lots of love, Emma xx

Recipe for project:

Tim Holtz Dies: Mini Holiday Greens, Tattered Poinsettia
Distress Spray Stain: Peeled Paint

Monday, 26 November 2018

The Gift of Christmas...

Hi everyone...

Hope you all had a lovely weekend and feeling the festive spirit! Can you honestly believe we're now only just 4 weeks away from the big day?!?! Well, if you're still looking for some gift ideas, then look no further because this week over on the Simon Says Stamp Monday Challenge Blog our theme is called GIFT IT and the DT have been busy creating projects to give you some inspiration and ideas of how to make some handmade gifts for loved ones!

This week I chose to make a little treat bag and a matching gift tag. I will be making a few more of these and then placing them on everyone's table settings on the festive table, it's just a fun way to create a little extra gift for my family to enjoy when we sit down to eat...


So, let's begin the brand new challenge and here's how I created my project...
 
To begin with I took the Tim Holtz Treat Bag die and used this to die cut kraft card before assembling the bag, which is super easy to do. Once I had my little bag, I then cut a second piece of card using the die but this time, I just wanted the front and back panels, so cut away the excess and then using my guillotine, I trimmed the panels down by approx 1-2mm on the three straight sides, leaving the torn, deckle edge showing at the top.

Using clear embossing ink, I then inked up the Music stamp from the Music and Advert Stampers Anonymous set and stamped the music background onto both panels of card, sprinkled white embossing powder over the top and then after tapping away the excess, heat embossed the music score.
After inking around the edges of each panel, I attached them onto the front and back of my treat bag and punched a hole through the top of the bag.

Moving on, I then started to create my floral arrangement that will be on the front of the bag and for this I used a combination of dies, which included the brand new Funky Festive, together with an older die ~ Mini Holiday Greens. I used foliage from each die and just cut myself a variety of pieces from Classic Kraft Card.

Once I had enough foliage, I then dry brushed the tips with Picket Fence Distress Ink before smearing some Matte Collage Medium over the top and dipping each piece into Rock Candy Dry Distress Glitter. Leaving the foliage to dry, I moved onto the poinsettias which are created using the dies from the Funky Festive set.

Firstly, I coloured some card with Candied Apple Distress Paint and then spritzed over the top with a Perfect Pearls Biscotti Spray that I have in my stash.

Once the painted card was dry, I then ran it through the die cutting machine to cut two sets of petals.

I lightly inked the edges of each petal with Gathered Twigs and then shape them around a pencil before layering them up to create dimension. In the centres, I added a small bauble which I coloured with Gold Mixative and Mushroom Alcohol Inks and just adhered into place with a dot of Matte Collage Medium. To complete the flowers, I used the splatter brush to splatter Picket Fence Distress Paint across them and after a light smear of Matte Collage Medium, dipped them into the pot of Rock Candy Glitter to create a sugar frosting.
When all the floral pieces were dry, I then just arranged them onto the front of my treat bag with some branches tucked into the arrangement that I bought from my local supermarket. For the little berries that you can see on the foliage, I used some Tonic Nuvo Crystal Drops and added them to the die cuts before giving them another dusting of glitter.
I then added a Tim Holtz Metallic Quotation sticker that I had left over from last year and some glitter dusted baubles that I tucked into the arrangement.
To complete the bag, I wanted to add a bow but keep a natural look to the project, so I thought I'd use some of the Mummy Cloth (but you can used hessian ribbon if you haven't got the cloth) and dyed it with Pine Needles Distress Spray Stain. I then threaded the ribbon through my punched hole...
...and used a loop pin to attach a Christmas Token and a little Tiny Bell.
So, here's the finished treat bag but I wanted to add a little gift tag...

...and for this I took a small kraft tag and stamped the music score directly onto the tag using a white ink pad. I then took one of the messages from the Festive Overlay stamp set and stamped this onto the centre using Jet Black Archival Ink. To complete the tag, I added a few splatters of Picket Fence Distress Paint and threaded some more of the dyed mummy cloth through the hole before attaching two small pinecone adornments, smeared with a little Matte Collage Medium and frosted with Rock Candy Dry Distress Glitter.
So, I really hope you've enjoyed this project and I hope it's given you some ideas of how you can create little gift bags of your own using this really cool die.
Don't forget, you can find more inspiration from my talented teamies over on the challenge blog and every week, one lucky random participant has the chance to win a $50 gift voucher from Simon Says StampYou have until Monday 8am Ohio time. 1pm UK time, 2 pm CET to join in and good luck....





See you very soon, love Emma xxx




Heat Gun

Tim Holtz Mummy cloth, Tim Holtz Quotations Stickers, Ranger Ink Perfect Pearls Spray and twigs from my own stash

Friday, 23 November 2018

always believe....

Hello friends...

I don't know about you but has Christmas suddenly crept up on us at an alarming rate? Where did November go? Eek, time is flying but amongst all the preparations for the big day, I thought I would share a project today, that I've made using some of the wonderful new Holiday idea-ology from Tim Holtz.

Every year I love to create advent pieces, and this year was no exception but I wanted to make something slightly different and decided to make an advent box instead. The idea of this box is that I'm going to fill it with chocolates and each chocolate will have a number attached to count down the days until Christmas and what will be left at the very bottom of the box is a key for Santa, so that he can let himself in through the front door ~ just in case he's too tired to come down the chimney!
But of course no box is complete without decoration and it's time to introduce you to this darling little girl called Clarice, who is patiently waiting for Santa to arrive and in this post I'm going to take you through what I did to bring this little scene to life together with some of the techniques I've used....


To begin with I took three Vignette Boxes ~ the largest, the next size down and then the smallest together with the largest Vignette Panel and a Vignette Frame that will fit the middle sized box. 
Each box was then covered in my favourite papers from the stash ~ oh how I love that festive foliage design, so much so I've actually chosen a similar design as wrapping paper for my presents and I started with the largest box, cutting panels of the festive foliage design to size and then adhering them onto the sides of the box with Matte Collage Medium. For the Vignette Panel, I chose the star design paper from the stash and again adhered this with Collage Medium.

I continued to cover the medium sized and smaller sized box with the papers, adhering it the sides, to the inside and to the fronts and backs of the boxes. Also, once these boxes are layered on top of one another, the smallest box at the top actually acts as a handle so that you can lift the entire top section off to reveal the box underneath...
...which I covered with some striped paper from an older Tim Holtz Christmas paper stash. This will eventually be where my chocolates are stored.
On this particular project I really liked the wooden edges to show on the box, so I chose not to cover these or apply design tape and kept it really natural looking.

So once everything was covered and the medium was dry, I then applied some Crackle Paste around the edges of the larger box and the smaller box. I allowed the paste to dry and work it's magic before using the Gathered Twigs Distress Crayon to just add some ageing, giving it the look of it being an old box.
Finally, I added a Vignette frame which I painted white and placed this onto the front of the medium sized box before adding a little gliding wax to accentuate the beading.

Right, all the boxes are now covered and before I build them up on top of one another, I would recommend that you decorate the inside of the medium sized box and the smaller box now, as it's so much easier to do at this stage, before they are in place. This is actually going to represent an open fireplace, so I placed some Spanish Moss along the bottom and added some pinecones into the mix. Along the top of the box, I attached some of the Christmas Fringe to create a garland and place two little bells hanging down in the middle. You can just see the decorations inside the box in the photo below...
On the small box, I added Quote Chips to the front ~ '25' and 'always believe' and then placed two mirrored stars either side of the chips. Finally, I added hex fasteners to each corner, cutting off the legs at the back of the brads and then attaching them with collage medium.
I can now build up my boxes starting with the largest placed horizontal at the bottom with the lid over the top, the medium sized box next with the aperture at the front and the small on top with the solid side facing forwards. On the top of the small box I attached a small Vignette Finial again painted white with a touch of gilding wax. I also added a decorative Curio Knob to the largest box.

Now for the fun part of decorating and you can choose exactly how you want to decorate your box, that's the fun part but I'll take you through how I decorated mine...
...starting with the little table that I made using a Vignette Finial base piece, again painted white with a touch of gliding wax. I then added a Wood Slice as the top and attached it with Collage Medium. On the table, I've added a little bottle of milk for Santa which is a Tiny Corked Vial, painted white and then had a Christmas Snippets Ephemera piece attached, complete with date. I added twine around the neck and added a Clippings Sticker 'for santa'! I also added some tiny keys and a Christmas card, made from a Snippets Ephemera piece just folded in half.
The Christmas tree is a Woodlands tree, which is coloured using Peeled Paint Distress Spray Stain. Just spritz the tree with the stain and allow to thoroughly dry. I then placed the tree into a Thimble painted with Festive Berries Distress Paint.

The baubles are all coloured with alcohol inks ~ Turquoise, Red Pepper, Botanical and Sunshine Yellow. I place my baubles into a sealed container, add a few drops of the inks and then swish them around to ensure they're fully coated. Tip them out onto a piece of kitchen towel and then attach them one by one to the tree using Collage Medium.

On the left hand side, I used another of the Thimbles to act as a container for the remaining coloured baubles.
The presents are actually dice that I've wrapped in some of the Tim Holtz papers and tied with twine and added a Clippings Sticker for Clarice.

I attached all the elements onto the box, using Collage Medium as my 'go-to' adhesive and I also arranged a piece of dyed cheesecloth in the centre. Finally, the star of my show, Clarice ~ the little girl ready and waiting for Santa to arrive and for this I used a Paper Doll, coloured using Distress Marker Pens. I then cut a strip of Mummy Cloth and dyed it with Antique Linen Distress Spray Stain. Once the cloth was dry, I wrapped it around Clarice's neck to keep her warm as she heads out for one final shopping trip, to get some cookies for Santa. I attached Clarice to my box and added the finishing touch of a star at the top of the tree.
All that's left now is to fill the box with 24 chocolates, each with an individual number....
...and add the key ~ I used one of Tim's Word Keys and tied a piece of green ribbon around it.
So, I really hope you've enjoyed this project and enjoyed how I bought Clarice's Christmas Story to life ~ I just love making these little scenes and this was such a fun one to create!
Thanks so much for stopping by today and a huge thank you to Tim, Mario and Paula for letting me play with all the wonderful new idea-ology products, I appreciate you all so very much!

See you all again soon...lots of love, Emma xx

Recipe for project:

Distress Spray Stain: Antique Linen, Peeled Paint

Monday, 19 November 2018

The Merry Moose...

Hello friends...

Hope you've all had a wonderful weekend and ready for the week ahead and of course, a brand new Simon Says Stamp Monday Challenge! This week, our theme is called LET IT SNOW and we can't wait to see how you will interpret the challenge and the DT are already looking forward to seeing all your fabulous creations!

For my project, I created a festive panel inspired by the Merry Moose die from Tim Holtz and Sizzix. As soon as I saw this die in one of Tim's Facebook Live video's I just fell in love with him ~ he is just the cutest and I just knew that he would be perfect proudly trotting through a winter wonderland, set against a night sky and a full moon and all I needed to do was take those thoughts in my head and bring that scene to life and I hope you love the finished piece....
So, it's time for the new challenge to begin and here's how I created Marvin (that's my affectionate name for him) the Merry Moose in his winter wonderland!
 

To begin with I inked the background ~ I cut a panel of white card, 14 x 18cm and I cut a circle from a sticky note, which will act as my mask to create the moon. I positioned the circle directly onto the card and then using Chipped Sapphire Distress Ink, blended the ink from the edges of the card towards the centre to create the night sky. Remove the mask from the card and ink the inside of the moon with Antique Linen Distress Ink, adding a touch of Hickory Smoke to add darker areas. To complete the night sky, I inked the edges with Black Soot Distress Ink and then flick small amounts of water over the ink, blotting away the excess before heat drying the card.
Once the background is completely dry, I then applied some Grit Paste through the Speckles Layering stencil to create the look of snow falling and applied this to the top section of the inked panel. Allowing the paste to dry thoroughly, I cut my stars from gold metallic kraft card using the largest star from the Snowy Stars die. I also had a few extra smaller stars left over from a previous project which I adhered to the background together with the larger star, which I placed in the centre of the moon.
Now for those mounds of snow that the Merry Moose is trotting through and for those I used the Home For The Holiday's die from last year and cut two layers of the snow from white card. I then placed the first of these layers onto foam pads and attached it along the bottom edge of my inked background. On the second layer, I wanted to stamp my sentiment in black ink and used the Christmas Greetings stamp from the Yuletide stamp set by Stampers Anonymous before attaching this layer over the top of the first using more foam to add even more dimension.
To add a little texture to the piece, I added some Grit Paste along the top edge of the die cut card and sprinkled with Dry Rock Candy Distress Glitter.

I've now taken you through the steps for the background, which I matted onto gold metallic kraft card to give a border around the edge and frame the panel.

I then cut a Dina Wakley canvas board down to measure 23 x 18.5cm and dry brushed the surface with a layer of Gathered Twigs Distress Paint. Once the paint was dry, I then applied some Picket Fence over the top which created this worn, vintage look around the edge of the canvas. To complete my backing layers, I cut a panel of the red snowflake paper from the Tim Holtz Christmas Paper Stash, stitched a border around the outside, matted it onto kraft card and then mounted the layers onto the canvas. Finally, I wrapped some twine around the bottom section creating a fan shape with the individual strands and secured it at the back.


I then mounted my inked panel onto the centre of the canvas using foam pads for some added dimension.

So, all that's left is the star of the show ~ the merry moose and to make him a little more chunky, I cut him three times from thick card before cutting a final layer from Tim's Substrate Sheets which added some lovely texture.
I layered all my pieces together using Matte Collage Medium and finishing with the substrate sheet layer before inking around the edge of the moose with Pumice Stone Distress Oxide Ink. For the antlers, I cut these from watercolour card and inked them with Antique Linen and Frayed Burlap Oxide Ink before attaching them to the main image. After adding his reins around his nose, I decided to give him a warm scarf and used Mummy Cloth dyed with Festive Berries Distress Spray Stain and wrapped it around his neck. I then added a couple of bells to complete his ensemble.
You can see how much dimension I've built up using foam pads to layer each individual piece in the photo below.
For the trees in the background, I cut all the pieces from watercolour card and painted the main trunk with Ground Espresso Distress Paint before adding my snowy boughs, which I then covered with Dry Rock Candy Distress Glitter. To add just a little hint of sparkle as if the moon was highlight the boughs, I then added a touch of gold metallic paint to the edges of the trunks and the branches.
Now all that's left to do, is to place all my die cut pieces onto the background to create the scene adding a small amount of white cheesecloth beneath his little hooves.
To complete this panel, I added a Hinge Clip painted with Festive Berries Distress Paint and hung a Christmas Typed Token and snowflake charm from it. I then placed two Mini Hardware pieces in the corners of the panel.
So that completes this week's project and I hope you've loved meeting the Merry Moose and enjoyed the creative process behind this festive panel ~ it sure was a lot of fun to create and Marvin never fails to make me smile wide when I see him!

Don't forget, you can find more inspiration from my talented teamies over on the challenge blog and every week, one lucky random participant has the chance to win a $50 gift voucher from Simon Says StampYou have until Monday 8am Ohio time. 1pm UK time, 2 pm CET to join in and good luck....





See you very soon, love Emma xxx




Heat Gun

Mummy cloth, Tim Holtz Substrate Sheets and white card all from my own stash
Powered By Blogger

Total Pageviews