Wednesday 13 August 2014

Nature's Beauty Tutorial

Hello everyone!

Today, I'm thrilled to be sharing my first post as a member of the Tim Holtz Media Team and for this post, I used many of Tim's dies to create a home decor piece, to showcase the stunning Layered Dragonfly die.

I love finding ways of taking dies to a whole different level and I also love creating pieces from scratch ~ so, with this in mind, I thought it would be wonderful to create a project that used dies in various ways to create texture and dimension!

To begin with I cut out my basic shapes from chipboard, using the Vintage Cabinet Card Die (3 pieces) and the Mini Cabinet Card Die (4 pieces) to create the aperture frames.
Stick all the die cut frames together to create one solid aperture and coat with a layer of Gesso. Paint the frame with Antique Linen and Frayed Burlap Distress Paints to give the appearance and texture of wood.
Die cut a piece of Manila card using the Cabinet Card Die and then, apply Distress Stain to your craft sheet, mist the card and the stains with a little water and swipe the card through the stains to pick up the colour. Heat dry the inked card and then, so not to waste any ink, pick up the remaining droplets of ink from the sheet.
Once the card is dry, attach a layer of Tissue Wrap over the top with Multi Medium.
Attach the covered card to a piece of the die cut chipboard and layer the aperture frame over the top to give you the centrepiece for your project.

Paint a layer of Gesso over the top of the Tissue Wrap and then add random flicks of Black Soot and Tumbled Glass paint. Apply a layer of Texture Paste through the Dot Fade Layering Stencil and set aside to dry.
Die cut two pieces of Garden Greens Foliage from Grungepaper and attach the foliage to the two remaining Cabinet Card die cuts using Multi Medium. These pieces will become the side panels to your project. 
Cover the whole die cut with a coat of Gesso. Once completely dry, paint the side panel pieces with the same colours of paint as you used previously on the frame.
Create a base for the project by using three pieces of chipboard, 5" x 1.5" and layer the pieces together to form a thick board. Apply a coat of Gesso to the board before painting it. Attach all the pieces, as shown in the photo below, to form a three panelled display piece. You will notice that I did have a Framework die cut in the photo above and I used this across the back of the piece to give it strength and decoration. At this point, I would give the whole piece a layer of Multi Medium as a sealant and to make it harder wearing.
Now to create that beautiful embossed dragonfly! For this, I used the Layered Dragonfly die and die cut a piece of Grungeboard and a piece of Grungepaper (not shown). I embossed both pieces using the Texture Fade.
Add colour to the body and wings using Distress Paints.
Then, gently heat dry and add a medium layer of Rock Candy Distress Crackle Paint over the top. Leave to dry completely.
Apply Distress Stain over the top of the crackles....
...and allow the stain to settle into all the cracks that have appeared. 
Once the stains are dry, clip the wings of the second Dragonfly, which was die cut from Grungepaper and attach them to the main body of the Grungeboard Dragonfly to give double wings. 
Add the dragonfly to the central panel of your display project, layering it over the top of some cheesecloth stained with Frayed Burlap Distress Ink. I then added an Idea-Ology Light Bulb to the centre of the body.
Die cut a piece of chipboard using the Pediment die and paint in the same colours as your project. Once dry, attach the Pediment to the top of the central framed section. I then used Distress Paints to give a verdigris effect to one of the gorgeous metal embellishments from the Adornments Nature set and attached it with Multi Medium.
As the final touch I used cotton spools, painted with Frayed Burlap Distress Paint and attached two of them to the centre of my project. I then placed a Collections Label Clip onto the shelf.

I really love how you can create so much texture using dies in different ways and hope you've enjoyed this tutorial, just as much as I have loved creating it!
Thank you so much for stopping by today!
Have a wonderful day and I'll see you again very soon!
Emma xx


Supply List:

Sizzix Alterations Dies: Layered Dragonfly, Cabinet Card Die, Mini Cabinet Card Die, Pediments, Garden Greens.

Paint: Distress Paints: Antique Linen, Frayed Burlap, Picket Fence, Moved Lawn, Antique Bronze, Tumbled Glass, Peacock Feathers, Black Soot; Rock Candy Crackle Paint; Gesso

Embellishments: Idea-Ology Label Clip, Ring Fasteners, Light Bulbs, Adornments Nature.

Ink and Stains: Walnut Stain Distress Ink; Tumbled Glass, Shabby Shutters, Scattered Straw, Picket Fence and Pumice Stone Distress Ink

Medium: Ranger Multi Medium; Ranger Texture Paste

Layering Stencil: Dot Fade

Surfaces: Grungeboard, Grungepaper, Melange Tissue Wrap

Added supplies from my own stash: Chipboard, Cotton Spools, Cheesecloth

40 comments:

  1. Stunning,I really think this is one of the most beautiful creations I have seen Emma. I am usually in awe of your flowers but this is something else,thank you.

    Hugs
    Donna xx

    ReplyDelete
  2. so beautiful must try this one

    ReplyDelete
  3. WOW Dahlink, this is just sensational. Have to agree that this is one of your best ever creations, i love it very much. Thanks for the step by step tutorial and i must get the Dragonfly Bigz die it is a need.

    Congratulations on your first post as part of the Media Team, you have done them proud :-) xxx

    ReplyDelete
  4. Wow! Fabulous use of die pieces.
    Would make a great photo frame too me thinks ;)
    xoxo Sioux

    ReplyDelete
  5. Very beautiful - I love layering die cuts to make faux chipboard embellishments for my mini albums etc

    ReplyDelete
  6. Absolutely beautiful as ever...still so pleased for you being on the team...thoroughly deserved

    ReplyDelete
  7. I love your interpretation with the cabinet die and it works so beautifully. A real wow factor project.
    Julie x

    ReplyDelete
  8. Very original Emma! Stunning work. Nikki x

    ReplyDelete
  9. wow , what a beautiful creation, Emma. you truly have taken dies at some level. Lovely composition.

    ReplyDelete
  10. Thanks for the tutorial. This is brilliant!

    ReplyDelete
  11. Blown away by your amazing project ... I looked at EVERY detail ... just AMAZING !!

    ReplyDelete
  12. Your tutorial is excellent and I LOVE your gorgeous finished project, the dragonfly is so beautiful....

    ReplyDelete
  13. This is why you belong on the design team! Your first piece is just spectacular and I can't thank you enough for explaining how you achieved the looks of each element.

    ReplyDelete
  14. A stunning first project Emma! Thank-you for brilliant tutorial, ideas and inspiration. Nicola x

    ReplyDelete
  15. Amazing as always Emma! 😀 xx

    ReplyDelete
  16. Very striking. Stunning. Love the simplicity of this item... Unique and pretty... all things that state what this is to me. Love, Light and Peace...Bonnie

    ReplyDelete
  17. oh Emma this is gorgeous. i'm sure the master is pleased. you should be so proud of yourself. hugs xx

    ReplyDelete
  18. Emma this is fabulous! I love the way you used the dies to layer and make the three panels! The colors are great, too. It all goes together so well. I gotta keep my eye on you!

    ReplyDelete
  19. Oh Emma this is a beauty! Love how you combined all these different dies. What an inspirational piece. Thank You!

    ReplyDelete
  20. This is insanely gorgeous. Love how you took diecuts that we are all familiar with and created something completely new. Stunning!! I adore the lightbulb on the dragonfly. Thanks for sharing this amazing creation with us. -- Mary Elizabeth

    ReplyDelete
  21. Great project! Love the colors and how you used all the die cuts. Good ideas!.

    ReplyDelete
  22. Making all the elements for this collector's piece is the ultimate papercrafter's challenge, and you've nailed it, Emma.

    I can imagine this adapted by a collector of (real) insects and then keeping the whole lot under glass - some kind of rare species deserving of the full TH-EW treatment.

    ReplyDelete
  23. Oh My Emma. This is absolutely beautiful. In fact one of the nicest things of yours I have seen, and you have done some beautiful things.
    I saw it on Pinterest but wanted to see it properly. Wow!
    Hugs
    xx

    ReplyDelete
  24. Emma this is just beautiful, I love the dragonfly especially, but the frame is fabulous too. What a debut!

    ReplyDelete
  25. A wonderful creation, the dragonfly looks stunning - gorgeous colours!
    Rebecca.

    ReplyDelete
  26. Utterly incredible Emma! It's all so superb. Jenny x

    ReplyDelete
  27. Love the dragonfly it was one of my guilty purchases just a few weeks ago :)

    ReplyDelete
  28. WOW! You've taken my breath away! The colors you chose, the composition, everything is exquisite.

    ReplyDelete
  29. Tim sent me over and so glad he did. This is Fabulous! I love it!! Gorgeous piece. TFS!

    ReplyDelete
  30. Awesome. I have and love the dragonfly. Thanks for the inspiration.

    ReplyDelete
  31. Every thing about this is beautiful.

    ReplyDelete
  32. This is just breathless! Love your projects, all of them! You rock! :-)

    ReplyDelete
  33. Gorgeous - great tutorial and congrats at TH Media Team :)

    ReplyDelete
  34. The way you pieced together the assorted die cuts to create this fantastic panel is absolutely brilliant! Love the color palette you used too. Super piece of work!

    ReplyDelete
  35. Oh, this is soooooo beautiful... now I have to have that dragonfly and more. I can't wait to look around your blog, where have you been all my life? I love this, love, love love.

    ReplyDelete

Thank you for all your comments and messages, they are all appreciated and I hope you'll come back and visit again soon...
Emma ~xx

Powered By Blogger

Total Pageviews