Hello everyone...
Hope you've all had a great weekend and you're now ready for the brand new week ahead! As always, the start of a new week, means that we have a brand new Simon Says Stamp Monday Challenge and this week we are asking you to RECYCLE!
So whatever you choose to use, whether it's old packaging, tins and jars, or just recycling an old technique that you've forgotten about...we hope you'll join us and play along.
For my make, I chose to use an old sketch book that has been in my cupboard for a while and if you know what I mean, it wasn't something I would want to leave out on my desk. So, with this in mind and with my love of stationery firmly set in my mind, I transformed the cover of the book into something that is a little more 'me' and a book that I would definitely have on my desk. I also wanted to have a play with Tim's brand new, and sadly last Distress Colour, SCORCHED TIMBER. This beautiful shade of brown was perfect for what I wanted, and is the perfect backdrop for my book cover and also, I’ll show you how creating different folds on the rosette, will give a different look to the finished piece!
So let's begin and here's how I breathed new life into an unwanted sketch book that had seen better days!
SKETCHBOOK COVER
To begin with I painted around the edges of the front cover, and the inside back cover with Scorched Timber Distress Paint, and I also painted the inside cover and the back cover before allowing the paint to dry.
I then cut a panel of Distress watercolour card, slightly smaller in size than the cover. I then applied Black Opaque Texture Paste through the Stampers Anonymous Rosettes Stencil to cover the entire panel of card. This will take two applications and I would recommend you allow for the first application to dry before applying the second.
I then took a combination of the following Distress Sprays and Oxide Sprays:
DISTRESS SPRAY STAINS: SCORCHED TIMBER, ANTIQUE LINEN, CRACKLING CAMPFIRE
DISTRESS OXIDE SPRAYS: SCORCHED TIMBER, TUMBLED GLASS
After misting the panel of card with a water, I applied the layers of sprays to build up the colour, applying one at a time and just dabbing away any pools of spray that would oversaturate the card.
Once happy, I dried the cardstock and then splattered the surface with Tumbled Glass Oxide Spray and added a strip of design tape along the top and bottom of the panel, placing it about 1cm from the edges.
When the panel was thoroughly dry, I stitched the inky panel onto a piece of felt that I cut with pinking shears and machine stitched a border around the outside edge and then adhered the panel onto the front cover.
In the top left hand corner, I stitched and then attached a Numbers Snippet and added a Mini Pin.
Below is a photo of the back cover which I had painted with the Scorched Timber Distress Paint and then mounted a piece of Tim's paper from an older paper pad to cover it.
TAG
Now for my tag, and once again I used Scorched Timber Distress Spray but this time combined it with Speckled Egg Oxide Spray and Antique Linen.
The sprays are applied in exactly the same way as I applied them to the background panel and once dry, I began stamping some layers over the top.
With the tag in a landscape position, I placed it into my stamp platform and using the numbers stamp from the Tim Holtz Inquisitive Stampers Anonymous stamp set, I inked the stamp with Scorched Timber Oxide Ink.
I stamped the numbers across the bottom of the tag, and removed the tag from my stamp platform. Don't remove the stamp at this point. I then misted water over the numbers to slightly blend them into the background and heat dried the ink before I placed the tag back into stamp platform in the same position as before and then stamped once again but this time using Vintage Photo Archival Ink, ensuring that the stamp will be in exactly the same position as the first time.
Now to add more layers, and I used the border stamp, "Claims For Error...." from the Inspector set, inked in clear embossing ink and stamped this above the numbers, before sprinkling with gold embossing powder and heat setting until molten.
I then used the alphabet stamp from the same set, and stamped this across the top section of the tag, again using clear embossing ink and gold embossing powder.
Finally, I stamped "Register 002408" in the top right hand corner of the tag using black Archival Ink.
After inking the edges of the tag, I cut a piece of silver metallic kraft stash card, used a sanding tool to sand the edges, which I then inked with Scorched Timber Distress Ink and then mounted the tag itself onto the metallic panel.
Using a Crop A Tile Tool, I punched a hole in the tag, then attached an eyelet over the hole before using foam pads to attach the tag across my sketchbook cover, leaving the end to slightly overhang the edge of the cover.
ROSETTE and TARGET LAYERS
For the focal point of the cover, I began with the Rosette, and cut red kraft stock card three times using the Vault Rosette Die. I attached the three pieces to form one long strip and then folded along the scorelines, valley and mountain folds before attaching the two ends to form the circle.
If you pop over to last week’s blog post, HERE, you will notice that I used, and folded the rosette as it was designed to be, (there is a subtle difference) but for this make, I wanted to create more of a bottle top feel, with a fluted edge to the rosette, so when I folded along the score lines, I folded the opposite way opposite way and then pushed down on the centre of the rosette, added hot glue in the centre and attached the seal to secure the rosette.
After lightly sanding and inking the edges of the rosette, I attached it to my tag, placing it on the left hand side.
For the next layer, I used the target from the Inquisitive Stamp Set. I stamped it onto the centre of the card panel using a combination of Barn Door and Black Soot Archival Inks. I always stamp using Tim's Stamp Platform and this allows me to use two colours on one image. Just ink up the image with Barn Door, stamp and then re-ink very lightly, not a complete coverage, with Black Soot and stamp again.
I then spritzed the card with Frayed Burlap and Lost Shadow before I inked the edges with Walnut Stain Distress Ink.
I used a 7cm Layering circle die to cut the target and then matted it onto a silver metallic die cut, cut using one of Tim's older die sets, Stitched Circles.
I then mounted the circle onto a piece of mica tile and attached this to my rosette.
INSECTS and OPTICAL LENSES
Using one of the insects from the Entomology Adornment pack, I painted it with Alcohol Inks, Sublime, Smolder and Envy. I also applied a hint of Mushroom alcohol ink over the top for more of a vintage feel to the metal.
For the optical lenses, I used a combination of Mushroom, Rust and Pitch Black alcohol inks to alter the metal and create a rusty appearance. Over the top of the inks, I applied a small amount of Statue Foundry Wax, literally just lightly touching the metal, not adding a solid coverage.
I then heat set the wax with a heat gun. Finally, I added drops of Mushroom alcohol ink to the glass, dabbing away any excess ink and just leaving a slight aged appearance.
Behind the glass lens, I cut a circle of scrap paper and after inking the paper and creating foxing marks, I attached them to my lens by adding a small amount of Matte Collage Medium around the edge to seal the paper.
I attached the lens to the centre of the target and then layered the insect over a piece of Mummy Cloth that I had in my stash, already colour tinted with Distress Inks.
We're nearly there and all that's left is to add the quote.
QUOTE and FRAME
As always, if you make anything, or if you've been inspired by anything that you've seen here on my blog ~ then please, let me know by tagging me on social media or leaving a comment here and I will be right over to take a look!
Don't forget that every week, one lucky random participant has the chance to win a $25 gift voucher from Simon Says Stamp and you can join in up to 5 times, which means you could have 5 chances to win. You have until next Monday at 8am Ohio time. 1pm UK time, 2 pm CET to join in and good luck....
Recipe for project:
